Special Design for Graphite Electrode Carbon Block - 550mm high power graphite electrode – Hexi
Special Design for Graphite Electrode Carbon Block - 550mm high power graphite electrode – Hexi Detail:
HP graphite electrode is mainly made of petroleum coke and needle coke, It is capable of carrying the current density 18-25A/cm2. It is designed for high power electric arc furnace steel-making.
Modern steelmaking methods mainly include converter steelmaking and electric furnace steelmaking. The most fundamental difference between the electric furnace steelmaking method and the converter steelmaking method is that the electric furnace steelmaking method uses electrical energy as a heat source, and the electric arc furnace steelmaking method is the most commonly used.
EAF steelmaking is based on the electric arc generated by the discharge between the electrode and the charge, which converts electrical energy into thermal energy in the arc light, and uses the direct action of radiation and arc to heat and melt the metal and slag to smelt steel and alloys of various compositions.
Typical Properties
|
Properties |
Position |
Unit |
HP |
|
Specific Resistance |
Body |
μΩm |
5.8-6.6 |
|
Nipple |
4.2-5.0 |
||
|
Bending Strengh |
Body |
Mpa |
10.0-13.0 |
|
Nipple |
18.0-22.0 |
||
|
Young’s Modulus |
Body |
Gpa |
8.0-12.0 |
|
Nipple |
14.0-16.0 |
||
|
Bulk Density |
Body |
g/cm3 |
1.62-1.66 |
|
Nipple |
1.74-1.80 |
||
|
CTE(100-600°C) |
Body |
×10 -6/ﾟC |
1.6-1.9 |
|
Nipple |
1.1-1.4 |
Graphite electrode composition
1.Petroleum coke is black and porous, carbon is the main composition, and the ash content is very low, generally below 0.5%.
Petroleum coke can be divided into two types of raw coke and calcined coke according to the heat treatment temperature. The former contains a large amount of volatile matter and has low mechanical strength. The calcined coke is obtained by calcining the raw coke.
Petroleum coke can be divided into high sulfur coke (with sulfur content above 1.5%), medium sulfur coke (with sulfur content 0.5%-1.5%), and low sulfur coke (with sulfur content below 0.5%) according to sulfur level. Graphite electrodes and other artificial graphite products are generally produced using low sulfur coke.
2.Needle coke is a kind of high-quality coke with obvious fiber texture, particularly low thermal expansion coefficient and easy graphitization. Therefore, needle coke is a key raw material for manufacturing high-power or ultra-high-power graphite electrodes featured with low resistivity, small thermal expansion coefficient, and good thermal shock resistance.
3.Coal pitch is one of the main products of coal tar after deep processing. It is a mixture of multiple hydrocarbons. Coal pitch is used as a binder and impregnating material. Its performance has a great influence on the quality of graphite electrodes.
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for Special Design for Graphite Electrode Carbon Block - 550mm high power graphite electrode – Hexi, The product will supply to all over the world, such as: Switzerland, Panama, Somalia, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Tony from Philadelphia - 2018.07.12 12:19
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Ella from Ecuador - 2017.11.29 11:09
