Popular Design for Spectrum Graphite Electrode - 600mm high power graphite electrode – Hexi

Short Description:

Product Detail

Product Tags

Feedback (2)

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Needle Coke For Graphite Electrode, Eaf Graphite Electrodes, Im8 Graphite Electrode Block, We warmly welcome clients from all around the world for almost any sort of cooperation with us to build a mutual advantage potential. We've been devoting ourselves wholeheartedly to supply consumers the very best company.

Popular Design for Spectrum Graphite Electrode - 600mm high power graphite electrode – Hexi Detail:

Grade:High Power
Applicable furnace: EAF
Length: 2100mm/2400mm/2700mm
Nipple:3TPI/4TPI
Payment: T/T, L/C
Shipping Term: EXW/FOB/CIF
MOQ:10TON

Comparison Technical Specification for HP Graphite Electrode 24″

Electrode
Item	Unit	Supplier Spec
Typical Characteristics of Pole
Nominal Diameter	mm	600
Max Diameter	mm	613
Min Diameter	mm	607
Nominal Length	mm	2200-2700
Max Length	mm	2300-2800
Min Length	mm	2100-2600
Bulk Density	g/cm3	1.68-1.72
transverse strength	MPa	≥10.0
Young’ Modulus	GPa	≤12.0
Specific Resistance	µΩm	5.2-6.5
Maximum current density	KA/cm2	13-21
Current Carrying Capacity	A	38000-58000
(C.T.E)	10-6℃	≤2.0
ash content	%	≤0.2

Typical Characteristics of Nipple (4TPI/3TPI)
Bulk Density	g/cm3	1.78-1.83
transverse strength	MPa	≥22.0
Young’ Modulus	GPa	≤15.0
Specific Resistance	µΩm	3.2-4.3
(C.T.E)	10-6℃	≤1.8
ash content	%	≤0.2

Compared with copper, graphite has advantages such as less consumption, faster discharge rate, lighter weight and smaller thermal expansion coefficient, so it gradually replaces copper electrode to become the mainstream of discharge processing materials. According to the capacity of the electric furnace, graphite electrodes of different diameters are used. For continuous use of the electrodes, the electrodes are connected by the threaded joint of the electrodes. The graphite electrodes used in steel making account for about 70-80% of the total consumption of the graphite electrodes.

Graphite electrode consumption and breakage is common in practice. What causes these? Here is the analysis for reference.

Factors	Body Breakage	Nipple Breakage	Loosening	Spalling	Electtode Loss	Oxidation	Electorde Consumption
Non-conductors in charge	◆	◆
Heavy scrap in charge	◆	◆
Transformer overcapacity	◆	◆		◆	◆	◆	◆
Three phase imbalance	◆	◆		◆	◆		◆
Phase Rotation		◆	◆
Excessive Vibration	◆	◆	◆
Clamper Pressure	◆		◆
Roof electrode socket not align with electrode	◆	◆
Cooling water sprayed on electrodes above roof							△
Scrap preheating							△
Secondary voltage too high	◆	◆		◆	◆		◆
Secondary current too high	◆	◆		◆	◆	◆	◆
Power too low	◆	◆		◆	◆		◆
Oil consumption too high				◆	◆		◆
Oxygen Consumption too high				◆	◆		◆
long time heating							◆
Electrode dipping					◆		◆
Dirty connection part		◆	◆
Poor maintenance for lift plugs and tightening tools		◆	◆
Insufficient connection		◆	◆

◆ Stands for being good factors

△ Stands for being bad factors

600mm high power graphite electrode2

Product detail pictures:

Related Product Guide:

We usually perform being a tangible workforce making sure that we will give you the most beneficial excellent plus the finest selling price for Popular Design for Spectrum Graphite Electrode - 600mm high power graphite electrode – Hexi, The product will supply to all over the world, such as: Accra, South Korea, Zimbabwe, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!

4tpi Nipples Graphite Electrode