OEM manufacturer Purity Graphite Electrode - 600 UHP graphite electrode – Hexi
OEM manufacturer Purity Graphite Electrode - 600 UHP graphite electrode – Hexi Detail:
Compared with HP and RP electrodes, UHP graphite electrodes have more advantages as follows:
*Lower electrical resistivity, the lower the resistivity, the better the conductivity and consumption
*Heat tolerance and oxidation resistance, reducing physical and chemical loss in practice, especially at high temperature in practice.
*Smaller coefficient of thermal expansion,the lower the coefficient, the stronger the thermal stability of the product and the higher the oxidation resistance.
*Low ash content, which will get oxidation resistance improved much.
| Comparison Technical Specification for UHP Graphite Electrode 24″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 600 |
| Max Diameter | mm | 613 |
| Min Diameter | mm | 607 |
| Nominal Length | mm | 2200-2700 |
| Max Length | mm | 2300-2800 |
| Min Length | mm | 2100-2600 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥10.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.4 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 52000-78000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.80-1.86 |
| transverse strength | MPa | ≥24.0 |
| Young’ Modulus | GPa | ≤20.0 |
| Specific Resistance | µΩm | 3.0～3.6 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for OEM manufacturer Purity Graphite Electrode - 600 UHP graphite electrode – Hexi, The product will supply to all over the world, such as: United States, Ghana, Thailand, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Fay from Curacao - 2018.11.22 12:28
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Lilith from Argentina - 2017.08.18 11:04
