OEM China Malaysia Graphite Electrode - 500mm high power graphite electrode – Hexi

Short Description:

Product Detail

Product Tags

Feedback (2)

To become the stage of realizing dreams of our employees! To build a happier, more united and extra professional workforce! To reach a mutual advantage of our prospects, suppliers, the society and ourselves for Regular Graphite Plate, Graphite Electrodes For Steel Mills, Powdered Graphite For Locks, For more info, be sure to call us as shortly as possible!

OEM China Malaysia Graphite Electrode - 500mm high power graphite electrode – Hexi Detail:

HP and UHP series of graphite electrode are very common in practice. There is a great demand in the world market. They are fit for electrical arc furnace, laddle furnace, and submerged arc furnace.

HP 500mm graphite electrodes are very common in practice. There is a great demand in the world market. They are fit for electrical arc furnace, laddle furnace, and submerged arc furnace.

The loss of graphite electrodes in electric furnace steelmaking is very common, what are they and what is it related to? The following description is for your reference.

Physical loss

The physical loss of the electrode mainly refers to the end consumption and side consumption of the electrode, which is mainly caused by mechanical external force and electromagnetic force. It is concluded as follows

Looseness and breakage at the joint, cracking of the electrode and part of the thread of the joint falling off, which is caused by poor quality of the electrode itself,

In terms of equipment, improper electrode diameter selection, poor electrode holder, lifting and control devices;In terms of operation, large pieces of scrap collapses, hitting the electrode and poor connection between two electrodes

Chemical loss

Mainly refers to the consumption of the electrode surface, including the consumption of the electrode end and side. Generally speaking, the end consumption can reach 50% of the total electrode consumption, and the side consumption is about 40%. The larger the contact area between the electrode and the air, the greater the intensity of the oxidation reaction, and the consumption will increase accordingly.

Physical Dimension and Typical Properties

Comparison Technical Specification for HP Graphite Electrode 20″

Electrode
Item	Unit	Supplier Spec
Typical Characteristics of Pole
Nominal Diameter	mm	500
Max Diameter	mm	511
Min Diameter	mm	505
Nominal Length	mm	1800-2400
Max Length	mm	1900-2500
Min Length	mm	1700-2300
Bulk Density	g/cm3	1.68-1.73
transverse strength	MPa	≥11.0
Young’ Modulus	GPa	≤12.0
Specific Resistance	µΩm	5.2-6.5
Maximum current density	KA/cm2	15-24
Current Carrying Capacity	A	30000-48000
(C.T.E)	10-6℃	≤2.0
ash content	%	≤0.2

Typical Characteristics of Nipple (4TPI/3TPI)
Bulk Density	g/cm3	1.78-1.83
transverse strength	MPa	≥22.0
Young’ Modulus	GPa	≤15.0
Specific Resistance	µΩm	3.5-4.5
(C.T.E)	10-6℃	≤1.8
ash content	%	≤0.2

500mm high power graphite electrode2

Product detail pictures:

Related Product Guide:

We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for OEM China Malaysia Graphite Electrode - 500mm high power graphite electrode – Hexi, The product will supply to all over the world, such as: Costa rica, Bogota, Ghana, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.

Graphite Electrode For Eaf Lrf