Massive Selection for Lf Graphite Electrode - RP 400 Ordinary power graphite electrode – Hexi
Massive Selection for Lf Graphite Electrode - RP 400 Ordinary power graphite electrode – Hexi Detail:
RP 400mm Graphite Electrode
For materials with the same average particle size, the strength and hardness of materials with low resistivity are also slightly lower than those with high resistivity.
For materials with the same average particle size, the strength and hardness of materials with low resistivity are also slightly lower than those with high resistivity. That is, discharge rate, loss will vary. Therefore, the natural resistivity of graphite electrode materials, in practical applications need to choose the material is very important. The selection of electrode material is directly related to the effect of discharge. To a large extent, the selection of material is appropriate, which determines the discharge speed, machining accuracy and surface roughness. Due to the different quality requirements of ordinary power, high power and ultra-high power graphite electrode, the aggregate composition of the preparation is also different. From the perspective of industry product trends, the development of graphite electrode to ultra-high power electrode is the future trend. The joints can be made with 3 or 4 buttons and are manufactured strictly within the industry standard tolerance range. Long and short specifications can be customized according to customer requirements, short processing time, strong production capacity, to meet the needs of customers at home and abroad.
| Comparison Technical Specification for RP Graphite Electrode 16″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 400 |
| Max Diameter | mm | 409 |
| Min Diameter | mm | 403 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.55-1.63 |
| transverse strength | MPa | ≥8.5 |
| Young’ Modulus | GPa | ≤9.3 |
| Specific Resistance | µΩm | 7.5-8.5 |
| Maximum current density | KA/cm2 | 14-18 |
| Current Carrying Capacity | A | 18000-23500 |
| (C.T.E) | 10-6℃ | ≤2.4 |
| ash content | % | ≤0.3 |
| Typical Characteristics of Nipple (4TPI/3TPI) | ||
| Bulk Density | g/cm3 | ≥1.74 |
| transverse strength | MPa | ≥16.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 5.8-6.5 |
| (C.T.E) | 10-6℃ | ≤2.0 |
| ash content | % | ≤0.3 |
Product detail pictures:
Related Product Guide:
Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for Massive Selection for Lf Graphite Electrode - RP 400 Ordinary power graphite electrode – Hexi, The product will supply to all over the world, such as: Jakarta, St. Petersburg, Australia, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
By Johnny from Liberia - 2018.12.22 12:52
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Phoebe from Malawi - 2018.07.12 12:19
