Hot Selling for Graphite Electrode In Furnace - UHP 500mm Graphite Electrode – Hexi
Hot Selling for Graphite Electrode In Furnace - UHP 500mm Graphite Electrode – Hexi Detail:
| Comparison Technical Specification for UHP Graphite Electrode 20″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 500 |
| Max Diameter | mm | 511 |
| Min Diameter | mm | 505 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.68-1.72 |
| transverse strength | MPa | ≥12.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 4.5-5.6 |
| Maximum current density | KA/cm2 | 18-27 |
| Current Carrying Capacity | A | 38000-55000 |
| (C.T.E) | 10-6℃ | ≤1.2 |
| ash content | % | ≤0.2 |
| Typical Characteristics of Nipple (4TPI) | ||
| Bulk Density | g/cm3 | 1.78-1.84 |
| transverse strength | MPa | ≥22.0 |
| Young’ Modulus | GPa | ≤18.0 |
| Specific Resistance | µΩm | 3.4～3.8 |
| (C.T.E) | 10-6℃ | ≤1.0 |
| ash content | % | ≤0.2 |
Graphite electrode is the only material that can withstand high temperatures up to 3000 degrees Celsius without being deformed and melted. So, they are chosen to make steel in electric arc furnaces (EAF) and ladle furnaces (LF).
How does it work in practice? While electrical current passing through the electrode, the electrode tips create an electric arc which generates extremely high heat and melts the steel into molten iron. High temperature resistance and thermal shock resistance makes it an indispensable material for steelmaking.
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Hot Selling for Graphite Electrode In Furnace - UHP 500mm Graphite Electrode – Hexi, The product will supply to all over the world, such as: Jamaica, Sao Paulo, Italy, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Eleanore from Rwanda - 2017.04.28 15:45
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Renee from Finland - 2018.03.03 13:09
