Factory Outlets Graphite Rod Electrode 6 Mm - 600mm high power graphite electrode – Hexi

Short Description:

Product Detail

Product Tags

Feedback (2)

We insist on offering premium quality creation with very good company concept, honest product sales along with the finest and fast assistance. it will bring you not only the premium quality item and huge profit, but the most significant is to occupy the endless market for Graphite Rod Electrodes, Graphite Electrode With Nipples, 5 Micron Graphite Powder, We will continually strive to improve our service and provide the best quality products with competitive prices. Any inquiry or comment is highly appreciated. Please contact us freely.

Factory Outlets Graphite Rod Electrode 6 Mm - 600mm high power graphite electrode – Hexi Detail:

Grade:High Power
Applicable furnace: EAF
Length: 2100mm/2400mm/2700mm
Nipple:3TPI/4TPI
Payment: T/T, L/C
Shipping Term: EXW/FOB/CIF
MOQ:10TON

Comparison Technical Specification for HP Graphite Electrode 24″

Electrode
Item	Unit	Supplier Spec
Typical Characteristics of Pole
Nominal Diameter	mm	600
Max Diameter	mm	613
Min Diameter	mm	607
Nominal Length	mm	2200-2700
Max Length	mm	2300-2800
Min Length	mm	2100-2600
Bulk Density	g/cm3	1.68-1.72
transverse strength	MPa	≥10.0
Young’ Modulus	GPa	≤12.0
Specific Resistance	µΩm	5.2-6.5
Maximum current density	KA/cm2	13-21
Current Carrying Capacity	A	38000-58000
(C.T.E)	10-6℃	≤2.0
ash content	%	≤0.2

Typical Characteristics of Nipple (4TPI/3TPI)
Bulk Density	g/cm3	1.78-1.83
transverse strength	MPa	≥22.0
Young’ Modulus	GPa	≤15.0
Specific Resistance	µΩm	3.2-4.3
(C.T.E)	10-6℃	≤1.8
ash content	%	≤0.2

Compared with copper, graphite has advantages such as less consumption, faster discharge rate, lighter weight and smaller thermal expansion coefficient, so it gradually replaces copper electrode to become the mainstream of discharge processing materials. According to the capacity of the electric furnace, graphite electrodes of different diameters are used. For continuous use of the electrodes, the electrodes are connected by the threaded joint of the electrodes. The graphite electrodes used in steel making account for about 70-80% of the total consumption of the graphite electrodes.

Graphite electrode consumption and breakage is common in practice. What causes these? Here is the analysis for reference.

Factors	Body Breakage	Nipple Breakage	Loosening	Spalling	Electtode Loss	Oxidation	Electorde Consumption
Non-conductors in charge	◆	◆
Heavy scrap in charge	◆	◆
Transformer overcapacity	◆	◆		◆	◆	◆	◆
Three phase imbalance	◆	◆		◆	◆		◆
Phase Rotation		◆	◆
Excessive Vibration	◆	◆	◆
Clamper Pressure	◆		◆
Roof electrode socket not align with electrode	◆	◆
Cooling water sprayed on electrodes above roof							△
Scrap preheating							△
Secondary voltage too high	◆	◆		◆	◆		◆
Secondary current too high	◆	◆		◆	◆	◆	◆
Power too low	◆	◆		◆	◆		◆
Oil consumption too high				◆	◆		◆
Oxygen Consumption too high				◆	◆		◆
long time heating							◆
Electrode dipping					◆		◆
Dirty connection part		◆	◆
Poor maintenance for lift plugs and tightening tools		◆	◆
Insufficient connection		◆	◆

◆ Stands for being good factors

△ Stands for being bad factors

600mm high power graphite electrode2

Product detail pictures:

Related Product Guide:

We insist on offering good quality generation with very good business enterprise concept, honest income as well as best and fast assistance. it will bring you not only the premium quality product or service and huge profit, but probably the most significant is usually to occupy the endless market for Factory Outlets Graphite Rod Electrode 6 Mm - 600mm high power graphite electrode – Hexi, The product will supply to all over the world, such as: Pakistan, Greek, Czech Republic, With a fully integrated operation system, our company has won a good fame for our high quality products, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of "Credit first and customer supremacy", we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.

Different Size Graphite Electrode

Electrode Graphite

Graphite Electrode For Melting Steel

Graphite Electrode Powder

High Power Graphite Electrodes

Hp Graphite Electrode For Foundry

Hp Graphite Electrodes

Small Graphite Electrode

Spectrum Graphite Electrode

Uhp Graphite Electrode 400mm

In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!

By Nicole from French - 2017.06.16 18:23

Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!

By Miriam from Mauritius - 2017.08.18 11:04