China Manufacturer for Graphite Plate Electrode - RP 450mm Graphite Electrode – Hexi
China Manufacturer for Graphite Plate Electrode - RP 450mm Graphite Electrode – Hexi Detail:
The main raw material of graphite electrode production is petroleum coke. A small amount of asphalt coke can be added to ordinary power graphite electrode.
The main raw material of this kind of RP 450mm Graphite Electrode is petroleum coke. A small amount of asphalt coke can be added to ordinary power graphite electrode. The sulfur content of petroleum coke and asphalt coke should not exceed 0.5%. Needle coke is also needed to produce high power or ultra high power graphite electrodes. In addition, it has the prominent features of compact structure, good electrical and thermal conductivity, strong oxidation resistance, corrosion resistance, low resistivity, high current load resistance, low price and high cost effective. It is widely used in the smelting of various metals.
Steel is a big consumer in carbon industry, and graphite electrode has become the golden key for carbon industry to enter the steel field.
| Comparison Technical Specification for RP Graphite Electrode 18″ | ||
| Electrode | ||
| Item | Unit | Supplier Spec |
| Typical Characteristics of Pole | ||
| Nominal Diameter | mm | 450 |
| Max Diameter | mm | 460 |
| Min Diameter | mm | 454 |
| Nominal Length | mm | 1800-2400 |
| Max Length | mm | 1900-2500 |
| Min Length | mm | 1700-2300 |
| Bulk Density | g/cm3 | 1.55-1.63 |
| transverse strength | MPa | ≥8.5 |
| Young’ Modulus | GPa | ≤9.3 |
| Specific Resistance | µΩm | 7.5-8.5 |
| Maximum current density | KA/cm2 | 13-17 |
| Current Carrying Capacity | A | 22000-27000 |
| (C.T.E) | 10-6℃ | ≤2.4 |
| ash content | % | ≤0.3 |
| Typical Characteristics of Nipple (4TPI/3TPI) | ||
| Bulk Density | g/cm3 | ≥1.74 |
| transverse strength | MPa | ≥16.0 |
| Young’ Modulus | GPa | ≤13.0 |
| Specific Resistance | µΩm | 5.8-6.5 |
| (C.T.E) | 10-6℃ | ≤2.0 |
| ash content | % | ≤0.3 |
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for China Manufacturer for Graphite Plate Electrode - RP 450mm Graphite Electrode – Hexi, The product will supply to all over the world, such as: Malaysia, Brasilia, Tunisia, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Renee from Germany - 2017.02.28 14:19
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By Eden from Denmark - 2017.06.19 13:51
